Umfanekiso obonisiweyo weFolda yokuHlela i-S

Ifolda yokuHlela i-S

Inkcazo emfutshane:

1. Isantya esikhawulezayo – ukuya kuthi ga kwi-60m/min.

2. Ukusebenza kakuhle – izinga lokwaliwa eliphantsi, amathuba aphantsi kakhulu okuba ilaphu livalwe, nokuba livalwe, linokukhutshwa kwimizuzu emi-2.

3. Uzinzo oluhle – ukuqina okuhle komatshini wonke, ukuchaneka okuphezulu kweendawo zothumelo, kwaye zonke iindawo zihambelana neendawo ezikumgangatho ophezulu ezingenisiweyo.

4. Ukonga abasebenzi – ukuhlela ngokuzenzekelayo kunye nokubeka amashiti ebhedi kunye nezigqubuthelo zengubo yokwaleka kunokonga abasebenzi kwaye kunciphise ubunzima bomsebenzi.

Ishishini Elisebenzayo:

Impahla Yokuhlamba Ethengisiweyo (Indawo Yokuhlamba Impahla)

Thumela i-imeyile kuthi Ividiyo yeMveliso

Iinkcukacha zeMveliso

Umboniso weenkcukacha

Inkqubo yoLawulo

(1) Ukusonga ngokuchanekileyo kufuna ulawulo oluchanekileyo. Ifolda ye-CLM isebenzisa inkqubo yokulawula yeMitsubishi PLC, isikrini sokuchukumisa se-intshi ezi-7, esigcina iinkqubo zokusonga ezingaphezu kwama-20 kunye nolwazi lwabathengi abali-100.

(2) Inkqubo yolawulo lwe-CLM ivuthiwe kwaye izinzile emva kokulungiswa okuqhubekayo kunye nokuphuculwa. Uyilo lwe-interface lulula kwaye kulula ukuyisebenzisa, kwaye lunokuxhasa iilwimi ezi-8.

(3) Inkqubo yolawulo lwe-CLM ixhotyiswe ngokuxilongwa kweempazamo ezikude, ukusombulula iingxaki, ukuphuculwa kwenkqubo, kunye neminye imisebenzi ye-Intanethi. (Umatshini omnye awunyanzelekanga)

(4) Umatshini wokusonga we-CLM uhambelana ne-CLM spreading feeder kunye ne-high-speed ironer, enokwenza umsebenzi wokudibanisa inkqubo.

Inkqubo yokuQokelela nokuThumela

(1) I-CLM yenzelwe amaqonga amane okanye amahlanu okubeka izinto, anokucwangcisa ngokuzenzekelayo aze abeke izinto ezahlukeneyo, ukuze izinto ezifanayo zikhutshwe kwiqonga elifanayo lokubeka izinto.

(2) Ifolda yokuhlela ye-CLM ixhotyiswe ngomgca wokuhambisa, kwaye ilinen ehleliweyo ithuthwa ngokuzenzekelayo iye kubasebenzi bokubopha ukuthintela ukudinwa nokuphucula ukusebenza kakuhle.

(3) Ukuchaneka kokuqokelelwa kwempahla kungalungiswa ngokulungelelanisa ixesha lokusebenza kwesilinda kunye ne-node yokusebenza kwesilinda.

Umsebenzi wokuSonga oQokeleyo

(1) Umatshini wokusonga we-CLM wenzelwe ukuba ube nezimbobo ezimbini ezithe tyaba, kwaye ubukhulu bokusonga obuphezulu buyi-3300mm.

(2) Ukugoba okuthe tye sisakhiwo semela esenziwe ngoomatshini, esinokuqinisekisa umgangatho wokugoba nokuba ilaphu lingakanani na ubukhulu nobunzima.

(3) Ulwakhiwo lwemela oluyilwe ngokukodwa lunokuphumeza indlela yokugoba yokugqiba ukugoba oku-2 kwisenzo esinye, okungathinteli nje kuphela umbane ongashukumiyo, kodwa kufezekisa nokusebenza kakuhle kokugoba ngesantya esiphezulu.

Umsebenzi wokuSonga ngokuthe nkqo

Ingenza imigobo emithathu okanye emibini ecaleni. Ukugobosha ngakunye ecaleni kuyilwe ngendlela yokuxobula umoya, nto leyo enciphisa ngempumelelo ukugatywa kokugobosha kwelinen okubangelwa ngumbane ongashukumiyo.Ubungakanani obukhulu bokugoba ecaleni yi-3300mm okanye i-3500mm (ukhetho).

Ulwakhiwo Oluqinileyo

(1) Ulwakhiwo lwesakhelo sefolda yesantya esiphezulu se-CLM ludityaniswe ngokupheleleyo, kwaye yonke ishafti ende icutshungulwa ngokuchanekileyo.

(2) Isantya esiphezulu sokusonga sifikelela kwiimitha ezingama-60 ngomzuzu, sicubungula ukuya kuthi ga kwiishiti ezili-1200 ngeyure.

(3) Zonke izinto zombane, ezisebenzisa umoya, ezisebenzisa iibheringi, kunye neenjini zingeniswa zivela eJapan naseYurophu.

Ipharamitha yoBugcisa

Imodeli	I-S6-FZD-3300VI-4S	I-S6-FZD-3500VI-4S/5S	Ingxelo
Ububanzi obukhulu bokusonga (mm)	3300	3500
Iindlela Zokuhlela (ii-pcs)	4	4/5
Ubungakanani bokunqwabelanisa (ii-pcs)	1-10
Isantya Esiphezulu Sokugoba (m/min)	60
Uxinzelelo Lomoya (i-MPa)	0.5-0.7
Ukusetyenziswa koMoya (L/min)	450
I-Voltage (V/Hz)	380/50		Isigaba sesi-3
Amandla (kWV)	7.8		Kubandakanya iStacker
Ubukhulu (mm) L × W × H	4667×5320×2353	4875×5804×2353	Kubandakanya iStacker
Ubunzima (kg)	4000	4300	Kubandakanya iStacker